Dyna-Living Wind Turbine Generator 800W AC 12V 3 Blades Wind Turbine Motor with Charge Controller Wind Turbine Generator Kit for Boat Marine Garden…
$271.72
- [High-Quality and Durable]- The wind turbine motor adopts a three-phase AC permanent magnet synchronous generator, free running, low noise and long service life. Teflon wire is heat resistant, which is not easy to damage the wire when the machine is overloaded. It is smooth in operation, good wind resistance for double-row bearing.
- [High Wind Energy Utilization]-The coil is made of Teflon wire, which is resistant to high temperatures. It has effective regulation of current and voltage, low start-up speed but high wind energy utilization factor, which contributes to the annual energy output.
- [High-Quality 3 Blades of Wind Turbine Generator]-The blade is equipped with a copper inlay part that does not damage the nylon fiber when the bolt is tightened, the blades are not easily deformed or broken. The working temperature is -40 ° C ~ 80 ° C, do not worry about the temperature being too low and causing the leaves to freeze.
- [Unique Design]- The wind turbine generator adopts a permanent magnet rotor alternator and with a special kind of stator design, efficiently decreases resistance torque guarantees stability. The blades using reinforced glass fiber helped with optimized structure and aerodynamic shape, it enhanced wind power coefficient and power generating capacity.
- [Wide Application]-This wind turbine generator is easy installation and maintenance, which is suitable for the leisure sector, such as being used for boats, gazebos, cabins or mobile homes, as well as for green windmills, home, corporate and industrial energy for electricity supply.
Specification: Dyna-Living Wind Turbine Generator 800W AC 12V 3 Blades Wind Turbine Motor with Charge Controller Wind Turbine Generator Kit for Boat Marine Garden…
| Package Dimensions | 28 x 11.5 x 8.2 inches |
|---|---|
| Item Weight | 17.66 pounds |
| Manufacturer | Dyna-Living |
8 reviews for Dyna-Living Wind Turbine Generator 800W AC 12V 3 Blades Wind Turbine Motor with Charge Controller Wind Turbine Generator Kit for Boat Marine Garden…
Add a review
Related Products
Added to wishlistRemoved from wishlist 0
Added to wishlistRemoved from wishlist 0
Added to wishlistRemoved from wishlist 0
Jack Shepherd –
I don’t see anything close to 800 watts! at 12 V it.takes 68 or 70 Amps. not likely through number 10 stranded wire. Maybe they mean 80 watts? and I had to run it through an MPPT controller because average output was only 12 V. Need 14.2 to charge batteries.
gary woodside –
This product is incapable of any meaningful electrical uses. i have winds from the spinoff of hurricane Dorian and only getting 3amps of power, am an experienced licenced electrician and connection is a no brainier. should be removed from marketing.
Chris –
Last update. Dont buy. Replacement came and it wont even free spin. Both bearings are shot and I didnt open it but its possible the inside is damages further. I will not install
Update. 14wh after hours of 20+mph wind. The company messaged me it needs 29mph wind to work. So if this doesnt make power until 29mph and has to be stopped at 50mph then either the company is crazy and are selling a 20watt turbine or sent me a defective product. I sent them videos and pictures and they claim they cant see them.
Upgraded from a 400watt to this 800watt and in a constant 20mph wind I got just over 10 watts and barely 1.5amps. At 10mph my 400 watt would produce 10xs that.
I contacted the company so I will see if they respond. It spins freely and is using the right wires and controller.
Its very quiet because its not making any power
Erbsuperb –
Blades are made of plastic and do not create the necessary lift until the wind blows at or above 30 mph. If you buy this turbine resign yourself to upgrading the blades. Not sure if the generator works as there have not been sustained winds over 30mph. Going to buy a set of American made carbon fiber blades and will report back.
fp –
I bought the 800w – 3 blade for the purpose of maintaining my marine batteries on my fishing boat while I fished, moved, and kept dock. I was gone for 2 weeks and came back expecting the batteries to be near top. But to my disappointment they were at the same same level as when I left. During the 2 weeks there was decent wind off and on to rotate the blades. Several friends checked for me and said they were moving. I checked the system and confirmed the unit was generating juice, but not enough to make a difference. I think you need a sustained wind speed for at least 4+ hours at 25mph+ to make any difference. I will take down…I don’t recommend.
kp –
I’m an electrical engineer and figured this would be a good addition to my current solar setup. I understand turbine science and had realistic expectations. After a month of patience and 15-20mph winds with 40-50watt averages, today we have had sustained 30+mph winds for the true test. This turbine max wattage at nearly 45mph winds was 101watts. I should have known this would be the case as the included controller wiring just can’t maintain the current for a 800watt output. Looks like there are definitely better options out there for the same price range.
Gena R. Lancaster –
Five blades are better than three. This works good though. Had to find a good air stream for it to work good.
Chris –
It would work better in a location where there is greater than 13 m/s winds. I am moving it to a new location where there is more wind!