48V Hybrid Inverter 3500W Pure Sine Wave Inverter 80amp Mppt Controller, 48V DC to 110V AC Pure Sine Wave Inverter off GRID Solar Home Use Inverter…

★★★★★
(7 customer reviews)
Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

$499.00

Category:
  • 3500W 48V DC TO 120V /110V AC solar charge inverter and 80A Mppt charge controlle and 3500W pure sine wave inverter, all in one Hybrid Inverter machine.
  • Advanced MPPT technology Charging with an efficiency of 99.9% and inverter with DC to AC advanced SPWM technology which output pure sine wave power.
  • Fit for 40-60Vdc Lead-Acid and Lithium battery. 4 charging modes support: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
  • LCD screen and 3 LED indicators for dynamic display of system data and operating status, Intelligent variable speed fan to efficiently dissipate heat and extend system life.

Specification: 48V Hybrid Inverter 3500W Pure Sine Wave Inverter 80amp Mppt Controller, 48V DC to 110V AC Pure Sine Wave Inverter off GRID Solar Home Use Inverter…

Package Dimensions

19.2 x 16.4 x 8.1 inches

Item Weight

26 pounds

Manufacturer

PowMr

7 reviews for 48V Hybrid Inverter 3500W Pure Sine Wave Inverter 80amp Mppt Controller, 48V DC to 110V AC Pure Sine Wave Inverter off GRID Solar Home Use Inverter…

4.3
★★★★★
4
★★★★★
2
★★★★★
0
★★★★★
1
★★★★★
0

Add a review

Your email address will not be published. Required fields are marked *

  1. ★★★★★

    R. Cook –

    THis item took a long time to be delivered and unfortunately did not work for the application my nephew had. The return was easy and painless. I’m guessing they ship from out of the USA.

  2. ★★★★★

    Fernando H Ovando –

    Had an issue with shipping, they resolved it quickly and the product works beautifully. Great build quality and exactly what my Sprinter van needed. Thank you, will be buying from you again.

  3. ★★★★★

    Ruth Almonte –

    Thank you Amazon. Good Inverter Thank you for your support!!!

  4. ★★★★★

    Amazon Customer –

    This thing replaces the need for multiple components in a solar system. It has both the solar charge controller for just about any type battery you own plus a 3500 watt pure sine wave inverter contained inside. And what makes it so valuable is that it can be connected to house current or generator to produce battery back up and battery charge when solar is down. So it can make sure your batteries are always topped up for emergencies. An equivalent set up would include many components you’d have to mount in a system to perform the same function as this device. It’s possible to connect up the entire system in a few hours without racking your brain.
    And the unit features preset parameters for each type battery including several different types of lithium battery types. It monitors, charges and controls the system to give optimal and safe operation. It can also be fine-tuned if you need to deviate from the default settings in each category. So programming this is a snap. No need for a separate a-c to dc converter to use the generator of even house current to back up the solar panels. And it’s ability to customize the settings so you can make it solar, a-c or combination of the 2 preferred gives your system a great deal of reliability.

  5. ★★★★★

    P. C. –

    So the good news is that it works. Connected a 48V battery (53V nominal) and was able to power a basic 110V lamp. The problem is that the Power saving mode, which I refer to idle draw (no load), draws about 1.0 Amp on my 53V battery. That’s more than 50 Watts!!! Batteries get drained at a rate of 50W with no load! Not good. This “Power saving mode” draw is not advertised, and for good reason. The manual mentions a Power saving mode of <25W, which is still way too much, and doesn't match my measurements. Other brands who advertise their Power saving mode draw (meaning they have something to brag about) claim <2W idle. 2W versus 50 W…
    Also, not sure how pure the “pure sine wave” is, but I was unable to measure the output frequency, with and without load. My multi-meter showed bouncing values in the kHz range, instead of 60 Hz. My home outlets show a normal steady 60 Hz.

  6. ★★★★★

    tom zajac –

    Works as it should and the seller helped me answer a question promptly.

  7. ★★★★★

    Andrii V –

    It’s an awesome unit it works great tied to a grid once battery runs lower than I set it will kick in from utility power. Only thing that bothers me is Wi-Fi dongle doesn’t work the seller promised to send a replacement dongle but it never arrived

Related Products

Register New Account
Reset Password
Compare items
  • Total (0)
Compare